Water condensation on concrete ceiling causing mould contamiantion

Mould to ceiling

Our journey took us to Wiltshire on this mould investigation. We inspected a three-storey town building which had been converted into a dental practice for damp, mould contamination and air contamination. This building has a long-term history of humidity and mould problems on the ceilings throughout the property. Although none of the staff working in [...]

Read More

VOC test for a failed BREEAM development

voc testing for breeam development

Indoor air quality testing is one of the requirement in obtaining credits for Breeam projects. Breeam put an emphasis on the well being of future occupant and the developers must follow strict guidelines to unsure high quality of the indoor environment. One of the parameters that is closely monitored is indoor air quality which is ensured [...]

Read More

Microbiological verification – sewage cleaning

Sewage contamination in pub

We have been appointed to carry out a microbiological verification for the presence of sewage related pathogen. Recent heavy rainfall in a small town Hempel Hempstead have caused one of the local pubs to be flooded by sewage water. The rain water surged through the waste system and burst in through the drain inside of the [...]

Read More

Workplace noise exposure survey in a laboratory

workplace noise exposure in laboratory

We have attended a dental a laboratory where the employees were being exposed to a relatively loud noise from various types of machinery. As usually performed during workplace noise exposure assessment we have talked to the laboratory manager who talked us through the daily routine and tasks perform in the laboratory by various people. Once [...]

Read More

Mould Inspection and damp survey in London Practice

Mould in basement

My latest damp / mould inspection in London was in a former residential property which has been converted into a dental practice. The building is about 60-70 years and was originally used as a ground floor shop with upstairs accommodation. The building has been modified and extended over the years which contributed to the current [...]

Read More

Noise exposure on a powder packaging line

Control of noise in induction environment is an important challenge for health and safety managers. Some situation are inherently noisy and very difficult to control especially if old equipment is used and installations are complex. I have evaluated employees’ exposure to noise in a powder packaging unit. The unit consisted of one open plan packaging [...]

Read More

Mould contamination of a newly constructed apartment block

mould testing

It is a fact that just because an apartment or a house is newly build the owners do not have to deal with issues. In fact, an aged property with no history of dampness or leaks has probably less indoor air quality issues than a brand new building. I have visited a relatively newly constructed [...]

Read More

Mould contamination of an apartment for adjacent property

mould contamination in bathroom

Occupiers of an apartment in an inner city London were concerned about mould contamination in their home from an adjacent property. The neighbouring property was affected by water leak from the bathroom and construction fault on the balcony which resulted in significant water damage and mould contamination. The adjacent property was stripped to shell and [...]

Read More

Crystalline silica dust monitoring in a quarry

respirable crystaline silica

Stone excavation and quarrying is an inherently dangerous operation. In addition to the most obvious hazards associated with this work the less obvious but equally important is exposure to silica dust. Many operation performed on quarry site from drilling, excavating, crushing, screening and grinding can produce significant levels of respirable silica dust. Further, bulk material [...]

Read More

Building lead survey prior major refurbishment

lead material survey

Old buildings contain many materials which we now consider toxic or hazardous to health. These materials were either used directly in the construction of the buildings or were introduced later during its lifetime. Typical hazardous materials used in the construction were asbestos, lead and PCB others such as mercury or many specialty chemicals may have [...]

Read More