Property damage due to inadequate construction and leaking services

I have been called in to evaluate the extent of water damaged to the newly building designer property in the London area. The purpose of the investigation was to evaluate the extent of the water damage to the property, identify whether the property is contaminated by black water (sewage water), evaluate the levels of mould [...]

Read More

Mould growth on walls and bedding after radiator leak

This inner city London apartment has suffered from two unfortunate incidents of leaking radiator pipes. The apartment is relatively small and consists of one bedroom, a study room, a living room, a bathroom and a kitchen. The property was situated in a larger residential complex and is used only occasionally as a holiday home. I [...]

Read More

Black water (Sewage) contamination after toilet overflow

Inner city London apartment has suffered from a black water (sewage water) overflow from a faulty toilet. At the time of the incident the properly owners were unfortunately on holiday and discovered the leak only after several week. By this time quite a substantial mould growth has developed on the affected flooring and plasterboard partition [...]

Read More

Aspergillus fungal infection due to past time activities

People can sometimes experience deterioration of their health in their homes for no apparent reason. I have recently visited a property where an elderly gentleman started to suffer from shortness of breath, tiredness, lethargy and general exhaustion. It is only natural to us that we immediately try to identify the cause of such problems and [...]

Read More

Stachybotrys contamination of an inner city townhouse

I have  recently been appointed to carry out an investigation of a possible mould contamination in a stylish inner city townhouse. The property occupants have been suffering from bad musty odours for several months and have started to experience some odverse health symptoms. The facility management company in charge of the property has failed to [...]

Read More

Mould contamination due to building structural failure

Old period buildings often suffer from small structural failures due to ground subsidence, timber sagging or material deterioration. These common failures are usually quickly recognised and repaired by the property owners. The situation get sometimes a bit more complicated if properties are tied in long term maintenance contracts. Even though the maintenance companies are trying [...]

Read More

One problem masking another causing IAQ problems

Water leak in any property can have a have a long lasting effect and some unforeseen consequences. In this particulate case a substantial mould contamination to the part of the property was triggered by relatively small water leak to a modern boiler situated in the loft of a small bungalow. The leak has caused saturation [...]

Read More

Basement (crawlspace ) air causing indoor air quality problems

Air quality investigation is a complex task an only rarely the investigator come across immediately obvious answer to a problem. Typical investigation will usually involve sampling for most likely contaminants in the hope that some will be present at the concentration likely to cause the experienced adverse health symptoms. Preparation and consultation with the client [...]

Read More

Pest and Mould contamination after boiler leak

Water damage to the property is not usually limited to the immediately obvious water staining and possible material deterioration but sometimes escalates into a more complex issue affecting the indoor air quality in the whole property and having negative effect on the health of the  occupants. Water damage to a building is usually not a [...]

Read More

Moulds in wind turbines and risk to employees

Wind turbines are one of those odd and unusual places where you would not anticipate a mould problem. Their  construction is of almost pure metal with synthetic coating and minimum of absorptive surfaces. In recent years  employees working on wind turbines farms have started to encounter quite significant mould contamination problems. Typically internal surfaces of the [...]

Read More